Embosal can manufacture non standard size & thickness of Tubes & Pipes on custom requirement.
Circular Hollow Section ( CHS )
Rectangular Hollow Section ( RHS )
Square Hollow Section ( SHS )
Welcome to Embosal Tube Mills L.L.C
Embosal Tube Mills are Located in Al Ghail (Ras Al Khaimah), United Arab Emirates with the installed combined capacity of 270,000 Tons per annum. We are equipped with advanced state of art production machineries in large well organized factories. We are designed to produce precision square and rectangular tubes with specification range of 30x30x3mm to 800x800x40mm. and RHS 35x30x3mm to 800x750x40mm.
WHY TO CHOOSE
EMBOSAL TUBE MILL
WIDE SIZE RANGE
NO MINIMUM ORDER QUANTITY
SHARP EDGE TUBES
CUSTOM SIZE & SHAPES
VALUE ENGINEERING BENEFITS
APPROVED BY TUV RHEINLAND GERMANY
ADVANTAGE OF JUMBO HOT FINISHED SHS & RHS
Hot finished structural hollow sections are produced with a standard grade with yield stress of 355N/mn2, which fully complies with EN 10210 S355J2H on request also S + 460 can be used.
The sections have a Charpy impact minimum average energy of 27J at -20°C. All hot finished structural hollow sections have improved Corner profile of 2T maximum.
Hot finished SHS are manufactured in accordance with the European Standard for hot finished structural hollow sections EN 10210, with the technical delivery requirements of EN 10210-1:2006 and the dimensions and tolerances to EN 10210-2:2006 plus an improved corner profile of 2T Maximum.